into the same groups.
rh ............................ right hand
std........................... standard
(2) Second. Find the illustration covering the
thd .......................... thread(ed)
assembly group to which the repair part belongs.
thk........................... thick(ness)
(3) Third. Identify the repair part on the
UNF ........................ Unified Fine Thread
illustration and note the illustration figure and item
number of the repair part.
7. Federal Supply Codes for Manufacturers
(4) Fourth. Using the Repair Part Listing, find
Code
Manufacturer
the assembly to which the repair part belongs and locate
00000....... Ordnance Corps
the illustration figure and item number noted on the
01317....... Fyr-Fyter Co. Inc.
illustration.
03510....... General Electric Co. Small Motor and
b. When the Federal stock number or reference
.....................Generator Dept.
number is known:
05991....... Barton Instrument Corp.
(1) First. Using the Index of Federal Stock
06023....... Bastian Blessing Co.
Numbers and Reference Numbers find the pertinent
06247....... General Electric Co., Lamp Metals and
Federal stock number or reference number. This index
.....................Components Dept.
is in ascending FSN sequence followed by a list of
06853....... Bendix-Westinghouse Automotive Air
reference numbers in alpha-numeric sequence, cross-
.....................Brake Co.
referenced to the illustration figure number and item
07464....... Cardox Division Chemetron Corp.
number.
08132....... American Biltrite Rubber Co., Inc.
08484....... Breeze Corporations, Inc.
(2) Second. Using the Repair Part Listing,
09386....... Budd Co., Automotive Division
find the assembly group of the repair part and the
09393....... Rochester Gauge, Inc. of Texas
illustration figure number and item number referenced in
10665....... Cardair Division of Marmon-Herrington
the Index of Federal Stock Numbers and Reference
.....................Co., Inc.
Numbers.
13871....... Lenape Hydraulic Pressing and Forging Co.
c. When the Federal stock number or reference
14959....... Crane Co.
number is known and the repair part is not illustrated.
15840....... Danly Machine Specialties, Inc.
(1) First. Using the Index of Federal Stock
15852....... WS Darley and Co.
Numbers and Reference Numbers find the pertinent
16764....... Delco-Remy Division of General Motors Corp.
Federal stock number or reference number in the
19207....... Army Tank-Automotive Center
section titled Items not Illustrated and note the group
09728....... The Prestolite Co.
number. This section of the index is in ascending FSN
21102....... Evans Products Co.
sequence followed by a list of reference numbers in
22337....... Firestone Tire and Rubber Co.
alpha-numeric sequence, cross-referenced to assembly
24455....... General Electric Co., Lamp Division of
group number.
.....................Consumer Products Group
(2) Second. Using the Table of Contents,
24616....... Physics International Co.
locate the assembly group number and page number.
24617....... General Motors Corp.
(3) Third. Using the applicable group number
27182....... A L Hansen Mfg. Co.
and page number locate the pertinent stock number or
33334....... Kerotest Mfg. Co.
reference number in the Repair Parts Listing. Items
37239....... Lunkenheimer Co.
which are not illustrated are listed at the end of the
39428....... McMaster Carr Supply Co.
assembly group to which they belongs.
39709....... The Mercoid Corp.
41947....... Mueller Brass Co.
6. Abbreviations
48422....... The Wm. Powell Co.
ANPT ...................... Aeronautical National Taper
50798....... Richards-Wilcox Mfg. Co.
.................................. Pipe Thread
54713....... Shuler Axle Co., Inc.
deg.......................... degrees
56289....... Sprague Electric Co.
dia........................... diameter
57068....... Stanley Works
ft ............................. foot (feet)
57733....... Stewart-Warner Corp.
id............................. inside diameter
59730....... Thomas and Betts Co.
in............................. inch(es)
60038....... Timken Roller Bearing Co.
Ig ............................ long(length)
61349....... United States Gauge Div. of
Ih ............................ left hand
.....................Ametek, Inc.
mtg ......................... mounting
63220....... Henry Vogt Machine Co.
No ........................... number
65586....... Edwin L. Wiegand Co.
NPT ........................ American Standard Taper
66289....... Wisconsin Motor Corp.
.................................. Pipe Thread
70485....... Atlantic India Rubber Works, Inc.
NPTF ...................... American Standard Taper
70903....... Belden Mfg. Co.
.................................. Pipe Thread (Dryseal)
70955....... Blackstone Mfg. Co.
od ........................... outside diameter
v
