TM 3-6665-329-13&P
WARNING
HIGH VOLTAGE IS USED IN THE OPERATION OF THIS EQUIPMENT. DEATH OR
SERIOUS INJURY MAY RESULT FROM FAILURE TO OBSERVE SAFETY PRECAU-
TIONS WHEN PREFORMING TROUBLESHOOTING PROCEDURES OF THE TEST SET.
Use this
ideas to find where to start the Troubleshooting.
Symptom
Procedure Paragraph
1.
Input Voltage reading NOT
Para. 3-7.1
within acceptable limits
(24-36 volts).
2.
PRESSURE-VACUUM GAGE reading
Para. 3-7.2
shows unit unable to attain/
maintain required pressure.
2.
SYNC PULSE Lamp does not flash
Para. 3-7.3
6 times 1 in 10 seconds.
4.
Voltage readings(s) NOT within
Para.3-7.4
acceptable limits (5-20 volts).
3-31