TM 10-8415-208-12
Table 3-1. Unit Troubleshooting
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1
Tether Line Leaks
Step 1. Check the tether line and adapter fitting connections for tightness
Tighten all loose connections
Step 2. Inspect male pipe thread of adapters F101 and F102 for missing or worn anti-seize tape
Apply new anti-seize tape
Step 3. Check tether line and adapter F101 female connections for damaged or missing preformed
packing
Replace the tether line or adapter Fl 01 as necessary. Refer to paragraph 3-7. 2. 1
Step 4. Inspect the hoses for cuts, holes or punctures
Replace damaged tether line. Refer to paragraph 3-7. 2. 1
Step 5. Tether line continues to leak
Replace the complete tether line. Refer to paragraph 3-7. 2. 1
2.
Encapsulating Protective Suit Visual Defects
Step 1. Pressure test the suit. Refer to paragraph 3-6. 4
Patch any repairable defects or replace damaged components
Refer to paragraph 3-6. 3. 1
Step 2. Defects not repairable
Replace the suit. Notify your supervisor
3-6