Table 5-1 Operators Preventive Maintenance Checks and Services
Not Fully Mission
Drycleaning solvent PD-680 is toxic and flammable. Wear protective goggles and gloves
and use only in a well ventilated area. Avoid contact with skin, eyes and clothes, and dont
breath vapors. Do not use near open flame or excessive heat. The flash point for Type #1
Drycleaning Solvent is 1 00°F (38°C) and for Type #2 is 138°F (500C). If you become dizzy
while using cleaning solvent, get fresh air immediately and get medical aid. If contact with
eyes is made, flush your eyes with water and get medical aid immediately.
Tester/Shipping Case exterior will be
washed with soap and water if it
becomes unusually dirty. Remove
asphalt with PD-680.