TM 5-3740-218-13&P
4-20.
KEY SWITCHBOX ASSEMBLY REPLACEMENT (CONT)
C.
INSTALLATION
(1)
Attach key switchbox assembly (1) to engine angle (2) by installing two bolts (3), four washers (4), and two
nuts (5).
(2)
Attach key switchbox assembly front panel (6) by installing four screws (7).
(3)
Connect starter solenoid electrical leads (8).
(4)
Connect yellow and green oil level switch electrical leads (9).
(5)
Connect bucket harness connection J2 (10) (white with red dot wire).
(6)
Connect charging coil connection (11).
(7)
Connect bucket harness connection B2 (12) (white wire).
(8)
Connect bucket harness connection B1 (13) (white wire).
(9)
Connect bucket harness connection A1 (14) (black and red wire).
4-36