• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 5-283. Three-Way Valve
FLUSH TANK ASSEMBLY MAINTENANCE

TM-5-3740-214-14 Aerosol Generator Non-Thermal Insecticide Unltra-Low Volume Model XKA (NSN 374001-076-1341) Manual
Page Navigation
  402    403    404    405    406  407  408    409    410    411    412  
TM 5-3740-214-14
FORMULATION TANK ASSEMBLY MAINTENANCE (Continued)
Figure 5-284. Formulation Tank
(6) Install air pressure drain valve and hose.
f. Install formulation tank assembly.
(1) Set tank on base assembly, install washers, and tighten mounting screws.
(2) Connect fluid hoses to three-way valve and junction block.
Be sure to connect hoses to the correct
component.
(3) Hang hose harness from tank pressure regulator.
(4) Connect air hose to inlet side of tank pressure regulator.
(5) Connect green ground wire to junction block.
(6) Install fluid drain valve assembly to formulation tank.
(7) Install valve guard bracket to base assembly.
(8) Attach spring to valve and bracket.
Figure 5-285. Formulation Tank Fluid Drain Valve
5-254






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.