Table 5-3. Direct and General Support Maintenance Troubleshooting (Continued)
TEST OR INSPECTION
ENGINE SKIPS AT HIGH SPEED (Continued)
Figure 5-175. Spark Plug Gap
Figure 5-176. Carburetor
Check the spark plug for a spark.
Connect the spark plug wire to the spark plug and set the plug on a grounded part of the engine.
Turn the ignition switch ON.
Crank the engine by hand. When the points open and close, a spark will jump between the spark
If there is a bright blue spark, go to Step 2.
If there is no spark or the spark is weak and yellow, go to Step 2.