• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 4-89. Air Filter Cleaning
BELTS MAINTENANCE

TM-5-3740-214-14 Aerosol Generator Non-Thermal Insecticide Unltra-Low Volume Model XKA (NSN 374001-076-1341) Manual
Page Navigation
  135    136    137    138    139  140  141    142    143    144    145  
TM 5-3740-214-14
CARBURETOR ASSEMBLY MAINTENANCE
Figure 4-90. Carburetor
a. Adjust the carburetor without the engine running.
(1)
Turn both needle valves all the way to the right (clockwise) until they gently touch bottom.
(2)
Turn the main fuel needle valve to the left (counterclockwise) two full turns.
(3)
Turn the idle needle valve to the left (counterclockwise) 1-1/4 turns.
b. Adjust the carburetor while the engine is running.
(1)
Start the engine.
(2)
Turn the main fuel needle valve to the right (clockwise) until the engine slows down,
(3)
Turn the main fuel needle valves back to the left (counterclockwise) until the engine slows down.
(4)
Turn the main fuel needle valve back to the right to a position halfway between the slow down points.
Figure 4-91. Carburetor Removal
4-82






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.