5-6. SKID - Continued
Dry cleaning solvent, P-D-680 or P-S-661, used to clean parts is potentially
dangerous to personnel and property. Use in a well-ventilated area as the
fumes are dangerous if inhaled. Avoid repeated and prolonged skin
contact. Do not use near open flame or excessive heat. Flash point of
solvent is 100F. - 138F. (38D. - 59C.).
Clean the skid with an approved clean-
ing solvent and dry with a clean cloth
or compressed air.
b. Inspect for cracks and obvious
Replace a defective skid.
1. Tool box
4. Lines and fittings