5-3. MOTOR, ELECTRIC (MODEL - 12681-2) - Continued
b. Loosen setscrew (3) and slip fan (4) off
end of rotor.
Remove two screws (5) and cover (6).
Unsolder capacitor leads and remove
d. Remove two screws (8), cover plate (9)
and gasket (10).
e. Remove two screws (11) box (12) and
Remove seal (14), four nuts (15), four
screws (16) and end bell (17).
h. Remove four screws (19) two switches
(20), and end bell (21).
Remove rotor (25) rotating switch (22),
three plugs (23) and three grommets
Remove grommet (26) and (27) from
stator and housing (28).
Dry cleaning solvent, P-D-680 or P-S-661, used to clean parts is potentially
dangerous to personnel and property. Use in a well-ventilated area as the
fumes are dangerous if inhaled. Avoid repeated and prolonged skin
contact. Do not use near open flame or excessive heat. Flash point of
solvent is 100F. - 138F. (38C. - 59C.).