TM 5-3655-2141 3&P
4-12. MOTOR PULLEY - Continued
Dry cleaning solvent, P-D-680 or P-S-661, used to clean parts is potentially dangerous to personnel and property. Use in
a well-ventilated area as the fumes are dangerous if inhaled. Avoid repeated and prolonged skin contact. Do not use
near open flame or excessive heat. Flash point of solvent is 100F. - 138F. (38C. - 59C.)
CLEANING, INSPECTION, REPAIR
a. Clean all parts in an approved cleaning
solvent and dry with a clean, lint-free
cloth or compressed air.
b. Inspect pulley for cracks or obvious
Replace defective pulley.
a. Install key (4) in motor shaft.
b. Install pulley (2) on motor (3).
Install setscrew (1).
d. Install belt.