2-43. ELECTRICAL WIRING (CONT).
The two electrical wires from the fuel solenoid valve
Splice connector (21)
Using splice connector (21) on the ends of electrical leads (6 and 12,
are not components of the electrical wiring. They are
Fuel pump solenoid
shown on schematic on page 2-156), connect control box wiring to the
furnished with the fuel pump solenoid valve.
temperature limit switch (S1).
Terminal lug (23)
The fuel pump solenoid valve (22) wiring can be repaired by stripping
Terminal lug (24)
approximately 3/8 inch insulation from the wire. Insert lug terminal (23) on
the ground wire and lug terminal (24) on the input lead. Using the proper
tools, crimp both lug terminals onto the ends of the electrical wire.