Clean and roughen the patch (1) and the garment (2) with an abrasive strip (3).
Use maintenance kit adhesive in a well ventilated area only and avoid skin contact. Wear proper
protective equipment. Failure to do so may result in light-headedness or a burning sensation to
the eyes and skin. In case of skin contact, wash with soap and water. If vapors become strong,
leave the area and allow to ventilate.
Apply a coating of adhesive (4) to the patch (1) and the garment (2), and allow the cemented areas to
become tacky to the touch.
Place the patch (1) on the garment (2) to cover the damaged area, and press the patch (1) firmly in place
with hand roller (5).