Pintle Extension Replacement.

TM 10-5410-228-24

2.12.3 Pintle Extension Replacement.

This task covers:

b. Installation

a. Removal

INITIAL SETUP

Equipment Conditions:

Tools/Test Equipment:

Shop Equipment, Automotive Maintenance and

ECV power off, HMT removed.

Repair (Item 38, Appendix B)

ECV parking brake set.

Reference:

Personnel Required: (2)

TM 9-2320-387-24-1

NOTE

Remove/disassemble only to the extent necessary to remove or replace defective

assemblies/components. Use standard maintenance shop practices/procedures.

a. Removal (Refer to Figure 2-9)

The pintle extension is heavy. To prevent injury to personnel, two people are required to lift

pintle extension.

Remove four bolts (1), eight flat washers (2), four lockwashers (3) and four nuts (4) securing plate (5)

and pintle extension (6) to ECV rear bumper (7). Discard four lockwashers (3).

b. Installation (Refer to Figure 2-9)

Secure plate (5) and pintle extension (6) to ECV rear bumper (7) with four bolts (1), eight flat

washers (2), four new lockwashers (3) and four nuts (4).

181-1-M

Figure 2-9. Pintle Extension Replacement